How to use remote desktop android app

How-to-use-remote-desktop-android-app-featured.jpg

Step-by-step Remote Desktop configuration guide
Overview

This informative guide describes how you can configure Xtralogic Remote Desktop client (Xtralogic RDC) and Home windows RDP server computer, linked to a house network or simple small office network. Audience is customers having a moderate computer networking experience. If you want to access a pc on the corporate network, the very best strategy is to buy the aid of the administrator of this network, because on the corporate network usually just the network administrator will have the ability to carry out the necessary configuration changes, and also the network topology is probably more complicated than assumed within this guide.
The Figure 1 shows two typical situations for being able to access an RDP server computer using Xtralogic RDC placed on an Android phone. One scenario happens when the telephone is attached to the lan (LAN) over Wi-fi compatability. Within this scenario the Xtralogic RDC connects over Wi-fi compatability with the wireless entry way straight to the RDP server computer. The LAN Ip from the computer can be used for connecting.
Another scenario happens when the telephone is attached to the wide area network (WAN) over cellular data network (3rd generation, EDGE, etc.).
Within this scenario the bond will feel the wireless company network, then you definitely dsl or cable provider network, your network router and lastly towards the RDP server computer. WAN Ip or perhaps a DNS title supplied by DDNS can be used for connecting.
Figure 1.

How to use remote desktop android app1 How to use remote desktop android app

Step One – Configure Remote Desktop around the remote computer.
Follow among the following links for that operating-system around the RDP server computer.

Setting up Remote Desktop on Home windows Vista and Home windows 7
Setting up Remote Desktop on Home windows XP

Step Two – Make certain the LAN Ip from the host computer won’t change with time (optional).

You are able to skip this task for the time being, but bear in mind that the computer is probably established to have an Ip from the DHCP server (that is usually running around the router). The DHCP server allocates the IP addresses from the pool of accessible IP addresses also it can provide your computer another Ip once the computer is restarted. Hubs will often have an element that enables to order a particular Ip for any specific computer (according to its MAC address). This is actually the best answer. Stick to the router instructions regarding how to setup the DHCP reservation. When the DHCP reservation feature isn’t on your router, then you will have to by hand set a static Ip on the pc you will connect with. Choose an Ip unused in your local network and follow instructions for the operating-system regarding how to setup a Static Ip at Port Forward.
Step Three – Connect Xtralogic RDC towards the RDP server computer over LAN.

Even when your eventual goal would be to connect only when you’re abroad, over WAN, it’s suggested for connecting over LAN to check the Remote Desktop configuration around the remote computer. Make certain the phone is connected over Wi-fi compatability for your LAN (there’s no ’3G’ or ‘E’ icon towards the top of the screen).
To obtain the LAN Ip from the computer, press Home windows Logo design key and R key simultaneously, then type cmd on view area and press Enter. Type ipconfig in the command prompt and press Enter. The output proven below comes from Home windows 7, it appears similar for that other Home windows versions.

Start Xtralogic RDC on the telephone. You will find saved any servers yet, you’ll be given a welcome screen. Click Next on that screen. If you have produced servers, to be able to add a different one, touch Menu > Add server. Go into the LAN Ip within the Address area from the Xtralogic Remote Desktop client and touch the Connect button (the server entry you’ve just produced is going to be also saved). Should you haven’t joined user title and password, you’ll be motivated on their behalf later, following a connection is going to be established.

Step Four – Setup port sending around the router.

Computer systems linked to LAN behind a router aren’t directly accessible from WAN, since the router works network address translation (NAT). Only WAN Ip is obtainable from the web (see Figure 1). To be able to create a computer around the local network accessible from WAN, a port sending configuration entry, or rule, must be produced around the router. The terminology can vary for various router suppliers, but port sending rule basically has got the following four components: a protocol (TCP or UDP), a WAN (exterior) port number, LAN (internal) Ip and port. Based on the rule, all communication visiting the main harbour on WAN is going to be submitted towards the LAN Ip and port. Let us make use of the following notation to record a port sending rule:

[protocol] [WAN port] -> [LAN Ip]:[LAN port]
For Remote Desktop, automatically, the LAN port is TCP port 3389. The WAN port number could be selected to achieve the same return, 3389. Therefore the easiest port sending rule for just one computer while using default ports may be like this:

TCP 3389 -> 192.168.1.250:3389

The exterior port number isn’t restricted to the default value and could be at random selected to become between 1024 to 65535:

TCP 55000 -> 192.168.1.250:3389

The Xtralogic RDC can connect with any port. The non-default port number could be specified by the address area following a colon (the default port 3389 need not be clearly specified).

Utilizing a non-default WAN port aids in security a little, because an assailant will have to determine the main harbour number first. Also, utilization of non-default WAN ports is essential when multiple computer systems are necessary to be utilized from WAN. Such situation a port sending rules with various non-default WAN port amounts need to be produced for every computer. E.g, for those who have three RDP servers around the local network with LAN IP addresses 192.168.1.250, 192.168.1.249 and 192.168.1.248, you will have to configure the next port sending rules:

TCP 55000 -> 192.168.1.250:3389
TCP 55001 -> 192.168.1.249:3389
TCP 55002 -> 192.168.1.248:3389

And when, for instance, your WAN Ip is 70.74.34.12, the next WAN addresses to gain access to each one of the computer systems must be utilized in the Xtralogic RDC: 70.74.34.12:55000, 70.74.34.12:55001, 70.74.34.12:55002.
Following the needed port sending rules are determined, configure them around the router. Please make use of a great resource on port sending for the specific router model at Port Forward. On that website, find your router within the list and then click it. You’ll be given advertisement to have an automatic port configuration tool. If you won’t want to buy the tool and wish to perform the port configuration by hand (we advise to test that first), just follow “Click the link to skip this advertisement” link within the upper right corner, as well as on the following page find “Remote desktop” within the list.
Step Five – Connect with the RDP server computer over WAN.

To find out your WAN Ip, use whatismyip.com or ipchiken.com service. In Xtralogic RDC, give a new server entry using the WAN Ip, in order to modify a current one, lengthy press with an entry within the server list and choose Edit. Within the Address area go into the WAN Ip, and when you’ve set up non-default port, enter port number following a colon.

Step Six – Setup Dynamic DNS (optional).

Unless of course you’ve bought a static Ip out of your Web service provider, your WAN Ip could be periodically transformed through the Web service provider, for instance whenever you router is restarted. Consequently you will not have the ability to connect when you’re abroad. To resolve this issue a DNS title from the Dynamic DNS (DDNS) provider ought to be acquired. That DNS title won’t change as the account using the DDNS provider is maintained and can resolve towards the correct Ip. The DDNS is generally offered like a free service. Establishing the DDNS includes creating a merchant account with DDNS provider, selecting a DNS title, and setting up Ip upgrading service in your router or setting up upgrading software on the computer linked to your LAN. One particular DDNS provider is DynDNS.com. Stick to the Dynamic DNS setup guide by DynDNS.com beginning with Section 4. Once you acquired the DNS title, utilize it rather than the WAN Ip within the Address area from the Xtralogic RDC. If you are using non-default port number, specify it following a colon following the title.